Yes, we have seen a lot of people using the air compressor. But do we have a proper idea about the air compressor filter regulator? There are conceptions and misconceptions about it. More than that, people don’t know the proper way of setting up the device!
Have you tried to learn the proper air compressor filter regular setup? If you are still in confusion, we can be your guide! Yes, the manual helps, but for better understanding, things need a description!
And so, we have added some necessary information along with the proper method of setting up. All you need is to check it out and follow it!
Step by Step Setting Up Air Compressor Filter Regular Setup!
Never worry much about the air compressor filter regular setup! Get the required equipment and the safety gears. The other half is on us! This step-by-step process will make the procedure easier for you!
Step 1: Check the Parts
If you have an air compressor filter, you are lucky! If you don’t, we recommend you set up a compressor water separator. This is the only way to keep moisture away from the air tools! And for adding the regular to it, your first job is to get the different parts of your devices on one side and make sure that all of them are present or not.
In some cases, we mistake some attachments and then the whole work goes in vain. To stop it, you must check if all the necessary equipment is present there or not. Here, you will need a belt and a bolt. Also, the air hose is needed here. You have to ensure that these are working properly.
Step 2: Fill up the Tank
After you are done ensuring that all the necessary gears are there, you have to go through the air compressor filter dryer. All you need to do is check if it is working or not. Now, turn it on, and then, you have to add compressed air to the tank.
For filling it up with the compressed air, you have to take some time and wait for it to get done. Once the tank is full of compressed air, you have to check the sound. The generator tank must be filled up properly. Also, certify that it is creating a sound that ensured that it is full.
Note: After you have checked these, look for the manual of the device. The manual will help you do the work better than you can do it yourself. The proper installation method is mentioned in the manual. Before you start the process, we recommend you read the manual.
Step 3: Look for Noises
While checking the manual, have a look at the pressure gauges. These are what you will need while setting up the device. Read them properly and if necessary, note them. Now, before you begin the project, you have to start a trial first.
Testing the machine is an easy way to avoid future troubles. Once you give it a trial, you might face hissing noises. But if you do not listen to any sequels or sound, you are done with the installation! However, if there is a sound, you have to do it all over again; and this time, with more caution.
Step 4: The Link
In this step, you have to check the device’s Pounds per Square Inch. This is known as PSI. All you need to certify is that the PSI of your device is on par. It should be compatible with the generator you have. There should be links between the air tools and the air hose.
Also, the air compressor should be connected. If they are not linked up, the setup will never be fulfilled! So, your work is to ensure this. After this, you have to search for the ideal pressure regular setup. Also, have a look at the range from the manual.
Step 5: Start with the Knobs
Now, it is time for you to adjust the pressure controller! For this, first of all, you have to search for the T-handle. If you do not see any T-handle, you have to find the knob that is located on the right part of the device.
In this situation, keep in mind that, there are times when you won’t find the knob on the right side. If you do not find it there, you must search for it on the left side. Some knobs have the lock-in facility added with them.
If you haven’t seen them before, you might be confused. When you pull the knobs, they will be unlocked. On the contrary, when you push them, they will get locked once again! And when you need to adjust it, you have to open the knob and start working!
Step 6: Increase and Decrease the Pressure
Let us go ahead and check for the pressure adjustment. After you are done understanding the knob, you have to turn the knob clockwise first. In this manner, you can increase the pressure. You have to increase it a bit. Keep in mind that you should not go too high when you turn the knob.
Never try to go above the setup range. And when you want to lessen the pressure, all you need is to turn it anti-clockwise! Have you ever seen the ceiling fan regulators? Yes, there is the same thing! All you need is to turn it for increasing and decreasing the pressure.
Step 7: Check the Gauge
The gauge is a very significant thing that requires attention in this process. Whenever you turn the knob, you have to keep your eyes on the gauge. The needle of the regular will be pointing to the pressure. So, when you turn it, make sure that the needle is exactly pointing to the pressure you desire!
Once you are done with the installation, all you need is to lock the knob there so that it stays that way! For locking, you must push the knob a bit and it will be locked!
The process is easy but if you are new to these works, you might find it complicated! In that case, we recommend you go for a professional. Also, don’t forget to check the manual before you start! As different brands have different setup methods, it is a requisite. Make sure you check out the blog to learn more about indoor and outdoor devices! These make your home a better place to live!