5 Best Cam for 350 Chevy Truck? (Top Picks in 2021)

Best Cam for 350 Chevy Truck

The stock cam of the 350 Chevy truck isn’t bad, but it may not be for everyone. Depending on your requirements, you can go for aftermarket camshafts for this truck, and each hardware offers different performance traits.

However, you can only install aftermarket camshafts that are compatible with your car. Luckily, the Chevy 350 truck supports a wide array of cams. But, this also makes it considerably difficult to pick the best cam for 350 Chevy trucks.

To save you from hours of research, we decided to compile and review the top products that you can buy right now. These cams were selected based on factors like RPM range, performance, and compression losses.

Read this guide till the end to find the right one for yourself.

Top 3 Cam for350 Chevy – Comparison Table

Editor’s Choice

COMP Cams 12-602

COMP Cams 12-602-4- Best Sounding Cam
  • Brand: Comp Cams
  • Usage: Street/Strip
  • Operating Range: 2,500-6,400 RPM
  • Camshaft Material: Cast Iron

Budget Pick

Chevy SBC 350 5.7L

Chevy SBC 350 5.7L- Best for RV Applications
  • Brand: JAMSI
  • Usage: Pulling and RV Applications
  • Operating Range: 1800-2600 RPM
  • Camshaft Material: Manganese Phosphate Coated Flame Hardened Castings

Best Choice

Edelbrock 2102 Performer-Plus

Edelbrock 2102 Performer-Plus-Best for Smoothness
  • Brand: Edelbrock
  • Usage: Performance/Street
    Operating Range: Idle-5,500 RPM
  • Camshaft Material: Hardened Steel

How to Choose the Ideal Cam for 350 Chevy

When it comes to cams for 350 chevies, you need to consider certain factors for choosing what’s right for you. In this section, we’ll discuss these factors in brief.

RPM Range

The camshaft is highly reliant on the performance and capacity of the engine, which is why RPM plays a great role in ensuring proper compatibility.

Camshafts come with an RPM rating that they are compatible with. You need to match the RPM of your car’s engine to that.

Performance

Camshafts offer different types of performances based on their models, construction, and function. You’ll need to pick one depending on the type of usage.

For example, if you’re building a car for street performance, you need to focus on getting a smooth low to mid-range. On the other hand, if a performance car is your requirement, try hitting that high range.

Lobe Separation Angle

It’s important to ensure that the lobe separation angle coincides with the engine. This determines the time taken for the cams to move, and whether they will function in sync with the engine.

Valve Lift

All four of the products listed here offer a flat tappet construction. This type of camshaft needs to rotate constantly so that the engine valves can open. The engine won’t operate properly if these valves don’t open.

Compression Losses

Compression losses are detrimental to the performance as well as the health of the engine. These essentially are leaks that disturb the ratio of air to fuel in the engine. So, you should definitely beware of compression losses.

Top 5 Best Cam for 350 Chevy Truck Reviews in 2021

Here we’ll list the products with their key features and details. Go through them to learn about their advantages as well as disadvantages.

1. COMP Cams 12-602-4- Best Sounding Cam

Key Features:

  • Cam Type: Hydraulic Flat Tappet
  • Usage: Street/Strip
  • Camshaft Material: Cast Iron
  • Operating Range: 2,500-6,400 RPM

If raw performance is what you’re looking for, then you can’t go wrong with this one from COMP Cams. These camshafts are widely popular for their amazing performance and unique grinding sound.

You’ll find powerful exhaust notes with optimum overlap due to the combination of the early intake valve and opening and long exhaust duration.

Plus, it provides a broad torque curve and great horsepower gains, thanks to the three cams designed for a unique application. This is one of the reasons this is highly favored for muscle cars. The construction also produces great sound when the vehicle is idle.

As stated earlier, it comes with three different grinds, each providing different performance applications ranging from lower compression to higher compression, and all that with the gear ratio being lower and looser torque converters.

The operating range of this cam ranges from 2,500 RPM to 6,400 RPM. This range can handle any 350 Chevy you throw it into. The only drawback of this cam is that you need to install a high stall converter for it to provide optimum performance.

Yes, you can still install it on a stock Chevy 350, but we recommend installing an aftermarket converter for juicing out the absolute value out of this.

What We Liked

  • Enhances throttle response
  • Makes the sound more aggressive
  • Provides great exhaust notes even when idle
  • It will work even on a stock 350

What Could be Better

  • The power gains will not be massive
  • Requires a high stall converter

2. Chevy SBC 350 5.7L- Best for RV Applications

Key Features:

  • Cam Type: Hydraulic Flat Tappet
  • Usage: Pulling and RV Applications
  • Camshaft Material: Manganese Phosphate Coated Flame Hardened Castings
  • Operating Range: 1800-2600 RPM

These Chevy SBC camshafts are great for RV applications and pulling, and the versatility in construction also makes them great for the street.

This is a hydraulic flat tappet stage 2 cam that comes with lifters. If you want to change the stock lifters and don’t want to buy aftermarket ones, you’ll do great with these.

It offers low and mid-range torque that ranges from 1800-2600 RPM. This allows the cam to perform great with engines with high axle ratios. The advertised intake and exhaust durations are 278 and 288 respectively.

The stock automatic and manual transmissions of these provide great performance in RV applications. These will perform best if your engine has a compression ratio of 9:5:1 or less.

One of the best things about these is that they offer super-accurate valve train stability, which in turn provides higher power gains. By using the unique “Controlled Ramp” lobe, you can increase the life of the valve train. This will also provide higher acceleration rates.

The build quality is superb as well. The induction hardened billets with Manganese Phosphate coated casings

What We Liked

  • The 1800-2600RPM torque range
  • Great for pulling and RV applications
  • The controlled ramp lobe provides higher acceleration
  • Durable build quality

What Could be Better

  • The sound might not be to everyone’s liking

3. Edelbrock 2102 Performer-Plus-Best for Smoothness

Key Features:

  • Cam Type: Cast hydraulic flat tappet
  • Usage: Performance/Street
  • Camshaft Material: Hardened Steel
  • Operating Range: Idle-5,500 RPM

The Edelbrock 2102 camshafts are designed for providing optimum torque. This is considered as the best cam for 355 with Vortec heads by enthusiasts looking for performance.

These are designed for maximizing the performance of your Chevy trucks. The torque of these camshafts ranges from idle to 5,500 RPM. If smooth performance is what you want, then you should go for these.

That being said, these won’t provide high-end torque, but low-end and mid-range. This makes them perfect for street applications. These are very smooth, so you won’t find any problem gliding with them on the road.

Plus, as the cam is buttery smooth, it doesn’t produce much noise. It stays extra quiet when it’s idle, so that’s a plus for people looking for a relatively silent cam.

Thanks to the construction of this cam, you’ll get far better throttle response and torque than most other cams out there. So, these will serve you well even if you’re looking for good performance. 

You’ll get Hydraulic lifters and assembly lube with this kit. So, you won’t need to buy aftermarket lifters, which definitely will save you some cash.

What We Liked

  • Offers maximum performance in low-end and mid-range
  • Comes with assembly lube and hydraulic lifters
  • Top-notch throttle response
  • Smooth idling

What Could be Better

  • If it could push past mid-range
  • Flat-tappet cams are tough to maintain

4. Lunati 10120102LK-Best for Performance

Key Features:

  • Cam Type: Flat Hydraulic tappet
  • Usage: Street
  • Operating Range: 2000-6000 RPM
  • Camshaft Material: Hardened Steel

Finally, we have the Lunati 10120102LK Bare Bones. It is a Hydraulic flat tappet style camshaft. As we already know, these can be a bit tougher to maintain and to keep in good shape. Plus, flat tappet-style cams perform well, but they mostly come with performance caps.

What makes these viable despite the drawbacks is their price. You can get this flat tappet at great pricing, and the features completely justify the price. If you want more horsepower delivery out of your Chevrolet, then you can try these out.

The asymmetrical lobe design of these cams offers a quieter and much gentler closing. This not only keeps the engine quiet but also helps in preventing valvetrain wear.

This is definitely the best cam for 350 with Vortec heads for aggressive power delivery. The cam also comes with matched lifters that maximize its effect and extends its durability.

It’s also known for providing quality throttle response. It surely feels more responsive than the stock cams.

On the downside, this requires a lot of vacuum pressure to work, which can be detrimental in the long run. Plus, you’ll have to install new valve springs to get these working properly.

What We Liked

  • The RPM range is one of the highest in this price
  • Matching lifters
  • Budget-friendly
  • The capacity of providing aggressive power

What Could be Better

  • Needs new valve springs
  • Requires a lot of vacuum pressure

5. BTR Truck Stage 3 Cam

Key Features:

  • Cam Type: Flat Hydraulic tappet
  • Usage: Tow-friendly
  • Operating Range: 2000-6500 RPM
  • Camshaft Material: Hardened Steel

This one provides a complete set that offers all the components and tools that you’d require for installing a cam on your truck. If you’re a truck enthusiast and are looking for a cam that can boost the overall performance of your truck, then this is one of the best cams for you.

While this works with most stock converters, you may need to get a 2800-3000 RPM converter, depending on the converter installed in your truck. This cam doesn’t sacrifice even a bit on the low-end torque; still, it makes up by providing higher power and an idle note that’s distinct and soothing to hear.

It’s not suitable as an everyday hauler, but it’s a great camshaft kit for towing. Although it may work without an aftermarket converter, we highly recommend getting one for unleashing the full potential of this beast.

Overall, if you’re an enthusiast who’s looking for a beast for your muscle car, then this is the one you should go for.

What We Liked

  • The kit comes with a stage 3 cam, beehive springs, and quality pushrods
  • Provides high RPM range and a distinct sound
  • Works with stock converters of Chevy 350 trucks
  • A great choice for heavier vehicles

What Could be Better

  • Not ideal for the everyday hauler
  • It may require a 2800-6000 RPM converter in some cases

FAQs About Cam For 350 Chevy

1. How Can a Camshaft Affect my Car?

A camshaft improves a car in several ways. It will increase the overall horsepower of the car, improve the torque curve, and make the throttle more responsive. Plus, cams can also help the engine provide more power using less fuel, which in turn reduces fuel consumption.

2. Can a Cam Affect the Car Negatively?

If the cam isn’t compatible with the engine, then it will lead to failure, or you won’t be able to fit the cam in the first place.
Other than that, cams tend to make the engine a lot noisier, which many don’t prefer.

3. Which is the Best Sounding Cam for 350 Chevy Truck?

The COMP Cams 12-602-4 is the best sounding cam for 350 Chevy. It creates a beautiful exhaust noise even when the car is idle, making it the perfect choice for those looking for a noisy camshaft.

4. What are Over-Cammed Cars?

Due to the incompatibility between the cam and the engine, the valves on the engine can remain open for too long under certain situations. In these cases, if there isn’t enough supporting compression, it can lead to many issues.
This can easily be prevented by picking camshafts compatible with the car’s engine.

Conclusion

From the products reviewed above, you should be able to pick the best cam for 350 Chevy truck. All of these products are top-notch, but all of them offer unique traits.

So, it mostly boils down to your necessities. For example, both the COMP Cams and Lunati are amazing cams, but while the former is favored for its sound, the latter is known for its ability to enhance the performance of the car. You can’t go wrong with either as long as it fulfills your requirements.

About Jeremy

Hello! My name is Jeremy Bloomberg. I have been passionate about carpentry and DIY. Over the years, my passion slowly turned into expertise and wider knowledge about electronics. I’ve been involved in numerous projects, both professional and personal. I want to share all I have learned with you. Welcome!

Follow me: Facebook, Twitter