John Deere Utility Cart Replacement Tires & Wheels Seek Guide

Lawnmower, tractors, and utility cart, these are pretty common names for someone who has a lot to do in gardening and yards. The utility cart is something that comes in handy for every avid gardener out there. And one brand that is known for being absolutely promising for providing various gardening vehicles is John Deere.

Unfortunately, everything has an expiry date that you and I might not be always able to predict. And so, when the time to change your John Deere utility cart’s tires come, you need to find an ideal replacement. Today we’ll be focusing on john Deere utility cart replacement tires and wheels.

John Deere Utility Cart Replacement Tires & Wheels Seek Guide

Utility Cart Tire & Wheel Replacement Things to Know

It’s sad when you find out that one part of your years-old lawn mower dump cart starts misbehaving. There’s nothing to do except than finding an ideal replacement for it. And that’s what goes for tires and wheels as well. Let’s know regarding various replacement factors that you may need to overcome in this process.

Recommended Best John Deere Utility Cart Tires Below

Why Is It Important?

No matter what model you own already, there’s always the need for maintenance. Even with regular maintenance, at some point, you’ll have to think about changing the tire or wheel.

Why? Simply because it’s also a part of the overall upkeeping. Since there’s regular use with utility carts, wear and tears are very common to occur. As a result, it’s best to occasionally think about changing the tire or wheel. So that the actual cart stays in great condition.

To tell you the truth, most durable utility carts out there will last you a lifetime. But you have to promise on changing one part to keep it going that long. And that part is the tire or wheel.

Things to Consider

To find the right replacement tire you need to consider some factors such as tread pattern, loading rate and so on.

The Replacement Tire’s Tread Pattern…

You will usually notice numbers and special markings on an old tire. If you find anything like so then probably the rest of replacement part finding process is super easy.

One thing you need to care about is the tread pattern. Your old utility cartwheel or tire had a certain tread pattern that was able to provide enough traction and appropriate functioning. You need to find the replacement tire that comes with a similar style.

In some cases, using different tread style might help you in achieving better efficacy. Since you need to work in wet situations or sloped terrain, a traction tread pattern better than your previous cart’s tire style may work best.

Support Load The Same Way or Better…

You can’t imagine how important this point is to consider before deciding on any tire for your replacement needs. The tire you choose should be able to match a load rating. Refer to the load capacity of your previous tire in this case.

Also, if you own a utility cart with a weak flat tire or wheel that is unable to handle the load, it’s time to make a change. In the long run, this will help you to avoid puncture and wears.

Measuring Process to Find the Right Replacement Tires

Basically, its three steps to measuring the old tire that’s going to play as reference of a new one. I hope there’s no need to say that to find the right fitting tire replacement, you must take pre measurements.

Start by measuring diameter of the exterior tire side. In some cases, you’ll find overall size mentioned on the tire’s sidewall. It’s not sufficient since this won’t tell you about hub length and bearing size. These are distinct measurements. And so, to find the right tire size, you need to do this step of measuring tire outside diameter.

Next comes measurement of the wheel’s middle portion. It’s usually from one end to another within middle part of the wheel. It also can be from one bearing to another. Measuring this middle portion will help you avoid problems later on. Since space in the rim is not a part to get unaccounted.

And also, this is important to figure out space amount that rim takes on the axle. A too-short length will cause your tire to move side to side in axle. On the other hand, if it’s too long then there will be extending of rim beyond actual axle.

Finally, you need to measure down the bearing size. If you notice then you’ll see that the axle goes through on a certain point in your hum.

There should be a metal part right here and this is known as the bearing. This hole’s inside diameter is what you need to measure. To make the numbers more accurate, try counting axle diameter as well. This will help you get some on-point correct figures.


Be very sure whether it is a replacement that you need or perhaps some simple repair. Sometimes due to slow leaks, there could be flatness issues going around. If that’s the case, you don’t really need a replacement. Changing the tube should be enough.


And with that said, you are ready with all the basics of buying John Deere utility cart replacement tires. If you are going to replace it yourself, make sure you’ve enough knowledge on the entire thing.

I would recommend hiring someone to do the task if it seems overwhelming. And remember that replacing tire once in a while is not only necessary when the previous one knocks out. It can be a regular maintenance step you take to keep your John Deere Utility Cart living a long life.

About Jeremy

Hello! My name is Jeremy Bloomberg. I have been passionate about carpentry and DIY. Over the years, my passion slowly turned into expertise and wider knowledge about electronics. I’ve been involved in numerous projects, both professional and personal. I want to share all I have learned with you. Welcome!

Follow me: Facebook, Twitter

2 thoughts on “John Deere Utility Cart Replacement Tires & Wheels Seek Guide”

  1. I need two tires for my John Deere 10 P utility cart that you pull behind a tractor I cannot find them. I would like to buy them

Comments are closed.