How to Keep Car Seat Cover from Sliding

How to Keep Car Seat Cover from SlidingHaving a new car is fun and sitting there for the first time makes you happy. But once you start to realize the slipperiness of the seat covers, you get annoyed!

No matter if you are in the driving seat or the regular ones, if you have a sliding seat cover, you will never make yourself comfortable there.

And so, today, we have come to tell you how to keep car seat cover from sliding for a comfortable ride!

Methods of keeping Car Seat Cover from Sliding

Check out these methods so that you do not slip ever again while driving. These don’t reduce the sliding issue but also keeps the actual seat safe and damage-free!

Universal Bucket Seats

If you are using universal bucket seats, this method can help you to keep your car seat cover from sliding.

In this case, you have to take the headrest off first. After this, you can easily move the seat forward.

Here, you have to move the back of the seat to the front a bit so that you can set the universal bucket seat here.

Now, you have to slowly slide the seat cover. All you need to do is pull the seat cover down. At a point, it will stop.

You have to stop there. Now, you have to get your hands on setting the base of the cover on the seat’s base.

Once you are done, make sure you fasten the elastic. The elastic is located under the seat. There are also hooks added at the end of every elastic band.

After fastening them, you will see that the car seat cover will fit it snugly. Now, with the help of something sharp, work for making two holes on the backrest.

You need to make the holes on the top part of the backrest. Ensure that the holes are small and not so visible.

This is the position where the headrest’s poles will get into. After you are done, you have to take the headrest and insert it again.

Go through the holes that you just made properly. You have to out the headrest inside the holes to the top of the backrest. You are done installing the universal bucket seats!

Universal and Custom Bench Seats

Coverking - SPC131 Custom Fit Seat Cover for Jeep WranglerIf you use the universal and custom bench seats, you might also face your car seat covers sliding. For this, the best options to go for are a waterproof cover like the waterproof jeep wrangler seat covers. These will provide the ultimate comfort without any slipperiness.

However, if you follow these steps, you can stop it from sliding. First of all, you have to remove the seat.

Yes, you heard right, remove it from the car completely. And then, you need to get your hands on the backrest and remove it.

After taking it away, you need to fit the section that is marked as BACK on the backrest of your car’s seat.

Go through the base of the seat and line up the base pattern. Take it to the back rest’s pattern.

Here, you will need “S” hooks. Add these hooks at the end of all the elastic bands. Now, you have to secure the covers with the help of the hooks.

You are almost done now. All you have to do is place the rear backrest once again. Also, put the rare base inside again.

Have a look at the pattern match. Certify that they are secured properly. Also, the fitment over the seats should be perfect.

Once it is done, you should understand that your custom bucket seats are in the right condition.

Custom Bucket Seats

You might have custom bucket seats inserted in your car. For this, you have to check the procedures mentioned below to keep the cover in one place.

There will surely be shields or guards that cover the factory material. Firstly, you need to take all of them off.

Now, you have to search for the three strings. In the car seat cover package, you will get these strings.

Get your hands on the loops that are located in the bottom seat cover flap. All you have to do is tie the strings to the loops.

Now, take the bottom seat cover and put it in the seat. Place it properly and align the seam in your car seat cover.

Check the edges of the bottom part of the seat. Between the top part and the bottom part of the seat, you have to tuck all the strings along with the flap.

Slowly, you have to hold the strings and pull them under the seat. But before doing this, you have to check the bottom part of the seat.

There can be wire added under it. If you find any, you have to make sure that you are placing the stringent over the wire.

Otherwise, it will have a negative impact on the seat’s function. Now, it is time to tie the strings. Tie them with the loops that are in front of them.

Certify that you have secured the knot accurately. Have a look at the string added with the seat cover.

This is called the skirt string. All you have to do is weave it behind any mechanisms. So, the two parts of the skirt string are taken to the back.

After that, they are secured appropriately. After you have done this, you are ready! You have to take the shields and guards again and replace them on the seats.

If you have any headrest there, you have to remove them. After you are done with the first set of three strings, move to the second set.

Just like before, you have to tie them up. Take them to the top seat cover. In this situation, you will see that the second set of strings is attached to the loops that are on the flap on top.

Hold the top cover and take it down. Place it tightly over the seat. Fold it first and then tuck the edges carefully.

The three strings need to be fed now. Hold the strings one by one and pull them hard.

Tie them to the loops that are beneath the material. Now, put back the headrest you removed and you will see no-sliding anymore!

Wrap Up

If you haven’t yet thought about it, it is high time you thought about keeping the car seat from sliding. All you need to do is check out the steps we have mentioned.

With these steps, you can easily learn how to keep a car seat cover from sliding by yourself. You won’t need anyone’s help top. Write to us about how you keep the car seat cover from sliding!

About Jeremy

Hello! My name is Jeremy Bloomberg. I have been passionate about carpentry and DIY. Over the years, my passion slowly turned into expertise and wider knowledge about electronics. I’ve been involved in numerous projects, both professional and personal. I want to share all I have learned with you. Welcome!

Follow me: Facebook, Twitter